LulzBot TAZ FlexyDually Tool Head v2
It's time to unleash your LulzBot® TAZ! Now advanced users can print with both flexible and standard materials, during a single print run. Your industrial-grade LulzBot® TAZ is now more versatile than ever. You can use multiple materials to make parts with built-in dampeners or grips, stretchable straps with built-in buckles, or fittings with gaskets.
The LulzBot® TAZ FlexyDually Tool Head v1 features one standard tool head for materials like ABS, PLA, and HIPS, and a second LulzBot TAZ Flexystruder Tool Head v1 that allows you to print with flexible filaments like NinjaFlex™ and SemiFlex®. Both of these extruders can heat up to 240 degrees Celsius and are mounted on a single carriage.
Each nozzle diameter is .5mm which is optimized for flexible filaments. The .5 diameter slightly reduces X-Y resolution versus the .35mm nozzle on the Dual Extruder, however the increased diameter makes this tool head excellent at printing with flexible filaments. Changing nozzles is not recommended, instead print performance can be optimized through your LulzBot 3D printing software.
Parts & Specifications
LulzBot® TAZ FlexyDually Tool Head v1
Filament spool holder and components
Cable zip ties
Second tool head power cable
Filament feed tube
Required filament diameter: 3mm
Hot end temperature range: 120°C - 250°C
Nozzle size for both extruders: 0.5mm
Build Volume Impact: This tool head does not reduce the available build volume on your LulzBot TAZ because it features smaller stepper motors.
TAZ 4 -5 Installation instructions